Questions & Answers for: Jl Audio wiring diagram 2 ohm kicker cvr 10

...3 differrent ways and was also told the wrong way can do damage to the amp. if you could email me back at [email protected] i would appreciate it....Chris depends if its dual 2 ohm or dual 4 ...

...cvr when i have my music loud my amp turn off it just cut off and than turn on again can someone tell me what i need o whats wrong Hello, You need to use 4 guage or larger wiring with this amp. Also ...

...2 10" kicker comp vr c10d subs now for about 6 months, since then i also got a 10" blau, and a 10" mtx thunder series, i had all but one kicker hooked up in my car, then i got a ported box for 2 10" ...

...2 10" subs, i put the box in, and i put both kickers in. so now i have all of my subs in my car. an i have 1000 watts powering it all. it worked great for a few hours. then one of the kickers started ...

...kicker.com/Product_Manuals/93/104 , look at the tech manual, it will give you dimensions of sealed or vented and it will give you a couple of box ideas. sealed box volume: 1.0-4.6 cu. ft. ported box ...

...cvr in box it depends on what class of amp u have. and what ohms the sub is. check out this link. it has all the wiring option u need. just click on the set up u ...

...KICKER CVR'S AND HAVE SMOKED 3 DIFFERENT 1000 WATT AMPS IN A WEEK IAM RUNNING A O GAGE POWER WIRE AND A 8 GAGE GROUND WIRE THE WIRING WAS ALREADY RAN WHEN I PURCHASED THE CAR. IT ALSO HAS 16 GAGE ...

wiring on a cvr 12 to 4 ohms i am running a hifonics 2000 class D thanx for the help Assuming that you have a 4 Ohm Dual Voice Coil (DVC) sub, you should wire it in parallel for more output. Solid red

...wiring diagram for 1.5ω (1.5ohm) with 2 speakers. the diagram for 3 speakers will not work, because it would bring the load down to 1 ohm, and the amp cannot go below 1.5 ohm. to set up the ...

...one speaker and the - from the other will be connected to the amp. The other + and - from the speakers will be connected together. Here is a wiring diagram from kicker. ...