Questions & Answers for: wireless guest access

wireless) at the guest house. If the signal strength is decent you should be fine with getting a wireless NIC for the PC in the guest house. If the signal strength is bad, either buy a 802.11N router

...guest to login into my network You want to allow guests to access the Internet. is it a wireless network ? If there is any security on the wireless network then you will need to check the wireless ...

...wireless network.The second network is a guest network which will always show you unsecured.It will never show you secured and you can not make it secured.However it has a web based security.Anyone ...

...the wireless section you can enable guest access. On some models you can have the guest mode access only the internet, and you can select whether you want to have a password for the guest mode or

...Guest Network + reboot the normal wireless network stops working and can't be started again until I disable Guest network and reboot. Running W7 SP1 and have no problems other then guest ...

wireless guest account I can't get in the wireless guest account says I need password but I've used it a thousand times before The possibilities are -some one might have changed it for you. If someone

...Guest Access on the Wireless pane Step 6: If Guest Access is not listed in the left menu, click Security. Step 7: Select WPA/WPA2-Personal (PSK) from the Security Mode drop-down menu. Step 8: Enter a ...

...guest network or main wireless network? If he is connected to guest network then you can disable the guest network. If he is connected to the main wireless network then you can change the password of ...

...Guest' login on the wireless router. If it is your own network, you can set up a username-password pair through your router management. If it is someone else's router, you will need to obtain a ...

...connect software. Or you can open the setup page and check the wireless settings. Check this link for guest network settings. i hope this will help you. Cisco Guest network access for Linksys ...