Questions & Answers for: wire toggle switch cooling fan


...wire a toggle switch to get the fan to work, what could be the problem I believe your problem is with the PCM (computer) The car doesn't have a cooling fan switch, so I believe the computer should ...


...wire it up to ur battery, and have a toggle switch inside. u need to turn it on before u start engine, then turn off when u turn motor off. Here is a wiring diagram of how you should by-pass that ...


Question about 1992 Bonneville

1 Answer

wire to the "fan" on the fuse box (at the driver side) straight into a toggle switch i made into the dash by the steering bypassed the relay and once i hit that toggle switch i would turn

Question about 1996 SL

2 Answers

...toggle switch will have a fused wire (5 amp, 14 Ga.) Connected to the same starter terminal you connected earlier. Make sure toggle is in the off position to avoid surprise startup . Is the plug from ...

...toggle switch for the fan relay switch if the wiring is bad the resivoir is cracked in the front and wont hold pressure, my uncle tried to put JB weld on it to keep pressure but the hose connected to ...

wire from fan. relays are in fuse box in engine compartment along firewall. or you can hook the fan up to a toggle switch or hook fan up the the fuse box under dash to terminal that has power when key

...are two connections for the toggle switch. Connect two wires to the toggle switch and run one wire to one side of the fuse and the other wire to the other side of the fuse in place of the fuse

want to hook up a manual switch cut the two wires at the cooling fan and run a fused hot wire to one side, then run a ground to a toggle switch inside then go from the switch the other wire on the fan

...wire on one of the fans.or you can run a toggle switch inside the car but do not forget to turn it on and off when you turn the key off. That's why i like a key on power supply.also do not forget to ...

...What kind of wire can i look for at home that i can use to wire a toggle swich to fan? Use 12 gauge (about 1/8" wire) before the switch you need to install an in line fuse also. Very important. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

john h

Level 3 Expert

25008 Answers

Brad Brown

Level 3 Expert

18805 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6857 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides