Questions & Answers for: wire led tail lights cargo

...the led computer board at the bottem of tail light assembaly unfortonitly toyota dose not sell that led control board and makes you buy the hole houseing $210 for what is probaly a $ 20 control ...

...tail lamp unit from the cargo box. Disconnect the body wire harness connector from the lamp back plate connector. To install: Connect the body wire harness connector to the lamp back plate connector. ...

...cargo hook to gain access to the two hex head screws that hold the tail-light housing against the body.Remove the screws so the tail light housing gets loose and easily comes out. this will ...

...peddle then fine the +12 volt on the wire and hook it up to the brake led circuit.(only the brake circuit should be on) hope this help you. . On most LED taillights the earth wire is WHITE NOT

...when I open the tail gate like it's supposed to. I have replace the bulb and it still won't work. Maybe a fuse? But I have not Idea which one. try checkin the ground wire

...tail-light-wiring.html ------------ What wire to connect to hook up trailer on Nissan Sentra? http://technoanswers.blogspot.in/2012/02/what-wire-to-connect-to-hook-up-trailer.html -----------1994 ...

...lose of power on the tail light wire from the socket back to the wiring loom at the rear of the truck for a bad wire.you can check for a fuse but I believe there is only one fuse for both tail

...with a led cargo/brake light and replaced the switch so I can have a cargo light in back but now the led cargo lights will not shut off You wired it up wrong, exactly what you did wrong I can't

wire system while the led’s have three wires The LED lights have 3 wires for (a) Ground (b) tail (c) brake/turn The truck lights grounded through the housing. All you need to do is run the ground wire

...There are also LED Lamps if you want more light. https://www.google.com/search?q=1990+chevy+k1500+extended+cab+cargo+lamp+cover