Questions & Answers for: Infinity wire an amp

...amp. my ground wire is installed under the seat belt in the back with the paint scraped away. I feel i did everything right but apperently not. One more thing i got the amp used but was told ...

amp prob wire that come from the speekers came loose from the amp , a + and - wire, and now the amp and sub wont come on The speaker wire will not shut off the amp. Make sure that your power wire and ...

...wire my amp to my subs I have two Rockford Fosgate P2D210 subs and an Infinity Reference 1211a amp. I do not really know how to wire them, right now I have a positive and negative on each sub wired ...

...amp turn on wire on my radio harness. The Basslink turns on when radio is on but I get no sound from the Basslink. Any Suggestions? Do you have speaker wiring or RCA's hooked up from AMP to Basslink? ...

...wire (or solid blue) on the Sony. This will provide + turn on voltage to the factory amp. The other good possibility is that the Metra harness has a black and a black and white set of wires both must ...

...help!!!! Thanks, Chris Does it do the same thing if you remove the RCA input and disconnect the wires from the speaker terminals of the

...parallel then the load become .5-1 ohm and the amp is unstable (solution) wire 2 dual voice coil subs individually one from each terminal, and then wire the voice coils in series rather than ...

...isnt big enough for the subs you have or the wire (power) for the amp is way to small. car audio has specific requirements exact specs on all of it will make a big difference in the help we can

...amp connected, either the head unit is at fault or the remote wire is picking up 12V somewhere along it's path to the amps. Make sure you have it connected to the right wire on the Kenwood. Every ...

Amp. (The wire from power amp connects to it) As far me, the limiter circuit doesn't add much value, if you are careful enough not to push the subwoofer to its peak limits. There is a 7 wire bus which