Questions & Answers for: how to wire air handler to condenser

...Etheirway 3/4 3/8 works for both. Use 6 wire for tstat from tstat to furnace or air handler, and you need is 2 wire from condensing unit [outside] to furnace or air handler or anything more than

...Air Handler will not run. This is a 2006 Rheem model RHLA-HM3617JA Air Handler. I replaced both the condenser and air handler circuit boards. I replaced the motor in the air handler.. The condenser ...

...air handler to a straight ac goodman condensing unit.thank you for your help in this problem. Only 2 wires going outside. Yellow from the thermostat and the common wire from the lv side of the ...

...unit go yellow or y from Tstat and theother wire goes brown if it is a Rudd or Rheem. Red from Air HAndler goes to Tstat R Green to Tstat G white to w. If it is digital tstat brown goes to

...wire should be going to Y2 on the air handler and probably does not continue out to the condenser. The Y2 should be going to the contacor that brings on your backup heat. It seems like Y1 and Y2 are ...

...when contactor is push in so it should be ok .which terminals should 2 wire be conected to in air handler? Hello, you need the wires connected at Y and C for the contactor to energize the

...wire from the air handler to the thermostat. At the thermostat, connect the yellow wire to Y, the white wire to W, the green wire to g, and the red wire to r. At the air handler, connect the ...

air handler to condenser wiring only 2 wires go from air-handler to condensing unit on standard a/c systems unless you have heat pump system.

...air handler green black. Y (cooling) stat to condenser white or O&B terminal white black w 1 on air handler and blue (L Honeywell stat) to brown (c) condenser and to (C) brown on transformer. blew a ...

...air handler is in your hot humid attic. That means you have a drip pan under it and likely a tube from the air handler leading to the out side to allow condensation to escape to the outside of your ...