Questions & Answers for: wire 12v relay diagram

Question about 1992 XJ6

1 Answer

...12v goes away and the car will not run. Taking a wire directly from the battery positive terminal to the relay input, just as the car wiring should be, the engine runs fine. Could this be a bad ...

Ad

...wire and a sharp tip? Yes, but only if you push the horn button too ;-) My guess is that the horn lost its ground, but you can check this with the light. The horn only beeps when both GROUND and Pos ...

Ad

...12V between IG1 & IG2 one of them remains on all the time according to weather the relay is energised or not - this is not right. So I have wired the n/o contact of the relay to IG (1 or 2) wire ...

Question about 1990 F150

1 Answer

wire from battery go straight to ignition switch or go to ECM first.Have 3.2vdc coming from ignition switch to starter solinoid/relay and control relays. Go to autozone.com and register they have good

...12v. Wire is good to both horns. Need to find the horn relay to do further testing. Cannot locate in my chassis manual or on Winnebago's online wiring diagrams. see the diagram attached.God bless ...

...wire(positeve 12v) and run it to the switch side of the relay tap power(12v) constant to the relay and also a switch(12v) source and a ground ok it sounds hard but hre's a diagram good luck The fan ...

Question about 2000 Galant

1 Answer

...and the relay. If the headlight assembly is receiving +12v at the connector, check the bulb. If the bulb tests good with an ohmmeter, check for a broken ground wire. That is simply all there

...relay they just get fed directly from a fuse. The Signal lights also have a flasher in the circuit. Use a 12v test light to test for 12v on top of each fuse to find the open one rather than removing ...

...12v wireless 315 MHz remote control relay board 6-channel ... ? 4:36 https://www.youtube.com/watch?v=JBzL0MIno2w Feb 2, 2013 - Uploaded by Julian Ilett 12v wireless 315 MHz remote control relay board ...

...12V) from blower relay to blower motor Blue/Black: Ground from blower motor to chassis Here is the wiring color code diagram for the HVAC blower motor in a 2001 Toyota Sequoia: Black: Ground Blue: ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...