Questions & Answers for: Honda Odyssey wiper arm

...wiper arm retention nut. Remove this nut to get the wiper arm off, then remove the nut under neath which is the motor shaft mounting nut. Now, back inside to remove the other 3 motor mounting bolts. ...

Knocked the wipers out of alignment. Any way to fix? Hit a bird with my 2010 Honda Odessey. LOOK AT THE BOTTOM OF THE WIPER ARM SHOULD BE A NUT YOU CAN LOOSIN UP AND ADJUST THE WIPER AND RETIGHTEN

...is a puller for this. 3 Remove cowel cover . once cover is off you will see the wiper motor and transmission assy. Possibly a snap joint wore out oa nut holding motor drive arm in place loosened

arm holding the wiper best I could to see if was bent ,it looked ok. Hope you have an answer. The back and pasenger side work fine. Try swapping the arm and blade assembly from left to right to see if

...wiper should be able to come off from the rear. What do uyou mean "upside down?" at the pivot end there should be a nut, take it loose and adjust the arm. The nut is concealed under a cover so you ...

...wiper arm shaft the rear wiper arm shaft seems to be broken, the motor seems to be fine. how do i take the assembly apart to check what is broken or replace the wiper arm? There is a plastic cover ...

...fuse and it is fine. I do not know how or what else to check. How can I determine the problem and its proper fix? Thanks!! do you hear noise if so check the inside of the wiper arm it may be ...

...wiper arm & the outsdie lock of the shaft,remove the screws that hold the wiper motor inside, to I need to remove the 20mm nuts that hold the rubber seal outside the glass (in which I can not ...

...wiper arm and install the left wiper arm in the far left of the wiper movement. Turn on ignition and allow the left wiper to go all the way back to it's rest location at the bottom of the ...

wiper arm & see if the splines are damaged & if the motor works as it should There are no easy vehicle fixes You have to understand how something works & then diagnose why it doesn't &