...wipers will not lay down when I shut them off. I caused the problem when I took the wiper motor off to replace the windshield wiper solution tank off. I moved the "transmission" arm on top of the ...
Question about 1998 Venture Cargo
windshield blades are not working while wiper motors is working 1998 chevelot venture van both wiper blades are not working but wiper motor is working the top of wiper motor holding arm is staying in ...
...Windshield wipers stop in upright position windshield wipers work fine until you shut them off, they stay in upright position on windshield instead of down position You will need to replace the wiper ...
Question about 1999 Venture
...windshield wipers started to only work on high speed. They would not go down into the storage area unless you timed it right when you shut them off. Now the wipers will not come on at all. need to ...
windshield wipers stay up on the windshield, wont go back down when i shut them off There is a wiper pulse board on the wiper motor itself that is failing, this can be replaced without replacing the ...
Question about 2003 Venture Passanger
...windshield wipers won't go down. I own a 2003 Chevy Venture van whose windshield wipers won't park. That is they don't park where they are supposed to......they go through their standard cycle of ...
windshield wippers wont start check for blown fuse, then check for a defective wiper switch, i doubt both motor are worn, but it could be possible..spray window with windex on the windshield and then ...
windshield wiper blades. What position should the wiper blades be in efore connecting the blades to the new parts? 1999 Chevy Venture Van The wiper linkage and blades should be in the neutral position
wipers don't touch windshield I drive a 2001 Chevy Venture Van, that has the worst wiper system I have ever had, and I've been driving for 30 years. As soon as the temp starts to get a ...
Windshield Wipers wont work with the switch I had my alternator replaced on my van and every since then my windshield wipers wont cut on and off with the switch. The just run nonstop. When I give it ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions