Questions & Answers for: Fine Digital windows ce/manual

Question about FineDrive 400 GPS Receiver

2 Answers

...windows ce desktop. how do i go back to the navigation ? oops, are you holding down the home button?, that is usually the way to get to wince. if not, you will need to re-load the firmware to restore ...

Ad

Question about FineDrive 400 GPS Receiver

1 Answer

...you may be able to restore the old system, there should be an update program on the original sd card. to get to it you have to run windows ce by holding the lower right key (i think) while

Ad

Question about FineDrive 400 GPS Receiver

1 Answer

...windows ce. if it does then you may have a chance. the calibration for the screen can be done once you can run the unit but not gettign a fix could be even a faulty antenna. I created a dvd with the ...

Question about FineDrive 400 GPS Receiver

1 Answer

...software help? if your sd card is OK, there should be an update program on it, you have to go to windows ce on the unit to run this program. to do this hold the bottom right key while

...Stuart I read somewhere that if you hold the home key on power up it should go to windows CE rather than into the nav program. I dont have one to test right now but if it works, please let me

Question about FineDrive 400 GPS Receiver

1 Answer

but no luck. I would appreciate any help you can give me. MY GPS loaods to Windows CE desktop. Likely corrupt firmware. I have one on ebay almost all the time, was on vacation recently but I am back..

Question about FineDrive 400 GPS Receiver

1 Answer

windows CE screen.. can you pls tell me what needs to be done to get my device back to normal... also seems like map data has been wiped out.. no idea how?.. any help is appreciated.. Thanks ...Ana if

Question about FineDrive 400 GPS Receiver

1 Answer

...doe sno tpower up--lights indicate power to unit--but that is it--any healp greatly appreciated.. try holding the bottm right buttion on boot, should go to windows ce, if not you may be out of

Question about FineDrive 400 GPS Receiver

1 Answer

Screen defaulted to Win CE While using my gps the gps made a sound and defaulted to WIN CE screen. I am unable to get back to the navigations section. Any idea what I can do. well, I had a similar ...

Question about FineDrive 400 GPS Receiver

1 Answer

try holding down the two right hand keys on power up, this should bring up windows CE, if it does you may have a chance at recovering by manually running the repair data I sell to recover the firmware

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Fine Digital GPS Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66832 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Fine Digital GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...