need to be programmed in order to work? No. not the switch. Check to see if you have power going into it. I don't have the wire diagram, but you can take a test light and check each line. At least one
...goes down wont go back up and somtimes doors will not unlock {: ) Looks like you need a new driver door/window switch. A new switch will need to be programmed to your vehicle to function
...window and lock not working on driver side door on 2006 chevy trailblazer {: ) That's too bad. The driver door module could have been internally shorted out. It's normally not serviceable. A ...
window switch, the programmer needs to have access to GM's TIS2Web service, and a diagnostic tool like the Tech2 or MDI to interface computer with the vehicle through the DLC terminals. THATS ****
...window doesn't work but the rest of that door does. Any thoughts?? Please? Sounds like you have a bad drivers door module.(door switch).You really need to have a scan tool to verify if you have any ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions