Questions & Answers for: window run channel honda

Question about 1998 Civic

1 Answer

...run channels on either side of the window. I have replaced the regulator twice and it is still having problems as I haven't replaced the run channels. If not replaced very soon I can see myself ...

Ad

Question about 2000 Civic

1 Answer

...turns but nothing happens going up or down. Any suggestions on how to fix? needs a window regulater and i reccomend a window run channel. (the rubber the glass slides in) if it doesnt operate

Ad

Question about 2000 Civic

1 Answer

...window run channel (rubber the glass slides in) and the regulator. or to get by if the regulator isnt bent take the door panel off, take the door glass out, the front of the run channel inside the ...

...run channel back into the window and slide it down/ that piece should thengo into glass and hold it into the run channel. if you have any questions let me know Please rate my response thank you very ...

Question about 2000 CR-V

1 Answer

...Run Channel" (the thing the glass slides up in) with silicon spray. If that is not a complete fix, possibly the window regulator is binding up and may have to be replaced. Check your local Honda ...

...in its right place. TJ push the window to the rear so it sits in the run channel and opperate the regulator with the switch up/down untill you can install the 2 10mm bolts into the regulator and ...

...run channel. The window regulator needs replaced and the rubber run channel needs inspected for damage and to make sure its properly seated into the window channels. note: make sure you install the ...

...run channel in a 1998 civic hx The problem is in the window rails they might of gotten loose or broken off. For this u need to remove the panels of the doors and check to see if they are unbolted or ...

...also a good idea when replacing the regulator is to replace the window run channel. it is the rubber molding that the window rides in inside the door and window frame. Good luck, Hope this helps

...run channel, then remove the channel. Remove the regulator mounting bolts and remove the regulator. On later models, there are additional roller guide bolts to be removed. Mark the roller guide ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...