Questions & Answers for: wind air mini split

Question about LS-L1210CL Mini Split Air Conditioner

3 Answers

...fan not working Solution # 1, Check Condensor Fan Motor Capacitor 4uf or MFD # 2, Check Motor Windings # 3, Check Relay OR Defination Contactor # 4, Check Connection Terminals hope will help u

Ad

Question about LS-K1830CL Cool Mini Split Air Conditioner

1 Answer

...outside ambient temps. will definitely cause the coil to ice up. An ouside temperature senor or a wind baffle should be installed in climates that get below freezing. This would definitely cause

Ad

Question about LS-L1210CL Mini Split Air Conditioner

2 Answers

...fan motor has a locked rotor. Solution is to check the indoor fan capacitor and replace or test the windings of the indoor fan motor. Note: the indoor fan motor is a BLDC fan motor and can not be ...

Question about LS-L1210CL Mini Split Air Conditioner

1 Answer

...Air Conditioner and need a remote control. Are you aware of: How I can get a remote Is there a universal remote that will work What are the remote codes for this unit Thanks I purchased a universal ...

Question about LS-K1830CL Cool Mini Split Air Conditioner

1 Answer

...WIND NOISE FREQUENTLY COMES, SIMILAR TO A STORM. FROM MY 1.5 TON **** LG UNIT It is ttime tto et your AC serviced.Remove the front filter after removing the front grille , then take the full ocver ...

AT HOME BECOME VERY DIM. AND AC DOESNT WORK SO I HAVE TO SWITCH IT OFF. CAN U HELP ? The compressor windings may have a ground or a short' The compressor needs to be ohmed, in order to be sure

Question about LS-K2430HL Heat Cool Mini Split Air Conditioner

1 Answer

...mini split fan not running This unit is about 6 years old. Not blowing cold, so I check the outside unit. Cleaned the tubing/fins and generally the whole unit. Compressor starts but fan for cooling ...

Question about LS-L1210CL Mini Split Air Conditioner

1 Answer

compressur is not starting gas is full check for power to the compressor. if there is power check the windings on the compressor

mini split mho50fxca2a with a I trip pfc overcurrent error what is this and where to start? also shows e4 67 which is compressor rotation error? Your 2 errors are most likely related to the compressor

...cold or too humid in my opinion. I think this mini split working in a last floor building , and have a great cold wind , There is no issues with your air conditioning, just working good in a hot ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Heating & Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...