Questions & Answers for: whirlpool washer little plastic cups

Question about 20172 Top Load Washer

1 Answer

plastic catch cup under the washer. We put the pin back in, but the washer will not spin right. The pins are supposed to fall out thats why there are plastic catch cups. Its designed for shipping with

Ad

Question about 22422 Top Load Washer

1 Answer

...washer will drain but wil not spin if i help it ,it will spinthen it locks up the tub moves more side to side than before . i looked under and didnt see anything that was broke. there are two little ...

Ad

Question about LSQ9610L Top Load Washer

1 Answer

whirlpool washer. Any hints on how to replce this stubborn rascal? hey no problem here easy fix.. fist off noever mind the little brass pin that fell out, that is merely a shipping pin {3 are in unit)

...Whirlpool top load, direct drive, neutral drain washer. Assuming that it won't agitate at all, but will pump, here are a couple of things to consider. 1. There is a motor coupling between the motor ...

Question about AWM5145/2 Front Load Washer

1 Answer

...Whirlpool AA1400 5145 I had remove bottom drain and there is some blocking then I don't know whow comes first the ball or the rubber. Regards, OA Hi I hope I understood your question properly. When ...

Question about 24032\24036 Top Load Washer

1 Answer

...washer and it still works, but a little bit of water runs out on the floor after if fills. how can i fix this? The pin is just an alignment pin used during assembly at the factory. You need not worry ...

Question about 3.2 cu. ft. Plus Top Load Washer

1 Answer

...washer (secure the drum) and is not used when in normal operation. There are 4 total that should be removed. They are stored in little cups on the legs, and likely fell out of the cup. Thanks for ...

Question about 3.2 cu. ft. Plus Top Load Washer

1 Answer

...Whirlpool top load, direct drive, neutral drain (it doesn't spin until the pump removes most of the water) machine. First, see the Sears parts site for your washer: ...

little rubber washer - looks like a tiny little barrel. Now I don't remember if I removed it from the top or the bottom pin! Where does it go? There are 2 rubber washers on mine - the top one is black

whirlpool ltg6234dq1 and two gold pins fell out also there are these two plastic cups or holders that go where the pins are located. What are the gold pins for? Question moved from Coffee Makers. Gold

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29492 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...