Questions & Answers for: whirlpool washer code 11f

Question about GHW9400 Front Load Washer

Whirlpool washing machine model GHW9460PWO, error code 11F

Whirlpool washing machine model GHW9460PWO, error code 11F I researched and found that this is a communications error between the CCU and MCU. I have have cleaned all connector contacts on these two ...

Question about GHW9400 Front Load Washer

1 Answer

Start cycle and the #11F comes up in the timer read out and machine stops.

Whirlpool is the manufacturer of both model washers and recommends the following troubleshooting advice. Remove the top panel of the washer by removing the three screws holding it in place in the rear

Question about Elite 45986 Front Load Washer

1 Answer

Kenmore Elite Washer blinks 11F

Question about WFW9200S Front Load Washer

2 Answers

Whirlpoop AWM9000-WM1100 Displays fault code 11F?

code 11F? any ideas greatfull F11 on a Whirlpool AWM9000: Service manual says "Communication error between Control board and Motor control unit (MCU)". -Check control board -Check MCU -Check wiring to

Question about Duet GHW9150P Front Load Washer

1 Answer

11F

11F error code? F11 is a serial communication error. Could be as simple as a loose or faulty wire harness, bad drive component or more complex like a failed MCU, CCU or even the motor. I wouldn't rule