Questions & Answers for: whirlpool refrigerator temperature goes down

...Whirlpool. The Refrigerator side has been freezing since replacing the Condenser fan unit with a universal motor. I then replaced the Thermostat control unit. The Refrigerator compartment unit is ...

...temperature in freezer. No water getting to ice maker The water inlet valve is the control device that allows water to enter the ice maker. It is energized during the last 5-8 seconds of the harvest ...

whirlpool fridge/freezer has stopped working today for no obvious reason. There is still power being supplied to the unit, as the light is still turning on once the door is opened, but it is no longer

...refrigerator side in the lower area behind the drawers is freezing, which is most likely the case. There are vents on the lower section for the crisper drawers. If you take out the drawers you'll ...

refrigerator both are rising in temperature, but the fans are running, etc. Normally in cases like this a humming sound followed by click is heard or sometimes just the click. The humming sound is the

refrigerator both are rising in temperature, but the fans are running, etc. Normally in cases like this a humming sound followed by click is heard or sometimes just the click. The humming sound is the

Whirlpool Refrigerator quit getting cold. Replaced defrost timer and it worked for 24 hours, now will not cool below about 48. Compressor and fans seems to be running fine. What next? Not sure exactly

refrigerator both are rising in temperature, but the fans are running, etc. Normally in cases like this a humming sound followed by click is heard or sometimes just the click. The humming sound is the

...temperature does not get below 70 degrees F or 20 degrees C then the refrigerator will work fine but to have it located in an area where temperatures drop well below this you could lose some food. ...

...refrigerator is running normally. Your compressor and fans will run based on the cooling demands set by you on your temperature settings. Once the temperature has been reached your compressor or fans ...