Questions & Answers for: whirlpool microwave power surge

...microwave wont work. It has the light on the led and on the inside but will not power on to heat food. Has a "d' on the right side of the time clock and time clock still work. Thanks for your ...

...whirlpool microwave and I went to turn the fan off and noticed that the child lock safety feature was turned on and the word sensor was showing. I don't know how to turn it off. My microwave won't ...

...Whirlpool microwave MT4155sps2 will not respond to any touch commands and displays F-1. Do I need to replace the entire control panel? I've been told by one person that it's a no brainer to replace ...

Whirlpool, model # MT1151SG. Unplug the microwave oven from the surge protector and plug it directly into a working outlet. If the microwave now works you will know that it is the surge protector that

...power surge from pole, light works, panel dead micro/ oven combo. Power surge from pole. clean cycle on oven does not work. micro light works but panel non responsive. Older unit. Thanks Sounds like ...

whirlpool gold series model gh7155xhs-1 buttons not functioning we had a power surge and now all the buttons are responding to either nothing or working as a different function. Like to set the time ...

...Whirlpool Over the range Microwave, m/n MH3185XPS-0. WE had voltage flucuations, and now there is no display/response from the control buttons. Found three fuses inside behind the control panel(1 ...

Microwave that appears to need a new magnatron. It stopped after we switched from defrost mode to full power. Died entirely. No power. We replaced the fuse and it comes on but will not heat and has an

...Old one was damaged by power surge. Ordered a new part but know I don't have a manual that shows me the wiring sequence. Here is a link to the wiring diagram. ...

...microwave does not work, model number MH1160XSB-0 whirlpool, what could be the problem? We put a fuse in and it kept blowing. Model MX6110XB.  Nothing worked.  LCD panel was dead.  ...