Questions & Answers for: Chevrolet weir sound

I have a 1991s10 pick up4x4 4.3 I replaced the fuel pump and sending unit/fuel filter/relay and checked all the weiring when i turn the key on no power to the pump then i hook up my tester to the ...

chevy blazer tahoe v6 4.3 vortec won't even give me a light before i replaced the engine on my chevy it turned on just wouldn't turn over. now that it is on it won't even turn the headlights on all i ...

e320 won't start after it removed the head and reinstalled it I removed the head to fix gloplug. reinstalled everthing and now wont start check firing order on sparplug weire

why wont my 85 caprice get any power all terminals to my battery are good and so is my battery it also has a solid ground. what could be the problem? chek weire on stater maybe losen Loose connections

my truck wont move in drive and third does the transfer case have anything to do with that If you are not hearing any weired noises coming from the trans you may have a burned out or bad solinoid. ...

...weir sound like it about to cut off and than rises back on. I want to know what is really the problem before I can fix it. Can you please help me... start with chking the mass air flo sensor,then ...

changing ignition control module sounds easy to change but I dont know where its located it is in the distributor it has multiple wires going to it you must first remove the dis. cap then the dis. ...

...we put a new starter on and it wont start it will start if u jump it from the cilanoid is it a bad weir or the swich ?? yes, wire or switch. Trace back from the solinoid until you get the 12 volts ...

My 2007 chevrolet z71 half ton 4.8 litre seems to shift from first to second on a delay and runs fine in those gears. I have reverse still. It will not shift to third of forth at all. I have topped ...

...gage still reads the same when engine comes to a stop oil pressure drops to red but no nocking or weir noices truck runs fine they told me it could not be the oil pump but the Bering on crank shaft ...