...weather etc. Then hold down Ch button for three seconds to clear the receive channel. Now in the outdoor unit select Ch1 using the slider switch in the battery compartment, insert the batteries, then ...
Question about AcuRite IndoorOutdoor Wireless Thermometer with Two Receivers
...remote sensor before I finally remember that you need to do the following to get the sensor to talk to the RAR186 base unit: On the base unit (RAR186), hold down the CHANNEL and MEM buttons for at ...
Question about 91655 Wireless Digital Outdoor Thermometer with Hydrometer and
...remote channel. I have pressed and held the "Channel" button on the base station to search for the remote, but that doesn't work. The other stations always read "--.-" so I assume ...
Question about 91655 Wireless Digital Outdoor Thermometer with Hydrometer and
...remote and the main unit. As well as the clear button. Nothing works. The alarm is a freeze alarm, it's a extra option, included at no charge, but only on channel 1.Change to another channel, and ...
Question about 91655 Wireless Digital Outdoor Thermometer with Hydrometer and
...Weather Channel indoor outdoor thermometer model #WS-7034TWC-IT The manual for the thermometer is available on the LaCrosse site: http://www.lacrossetechnology.com/7034twcit/index.php . The direct ...
Question about Wireless IndoorOutdoor Thermometer with Atomic Clock Sync
show the outside temp. You have to push some buttons to tell the MAIN unit to scan, then put battery into the REMOTE, set channel, and hit reset through a little hole. And the MAIN should see it
Usually answered in minutes!
2,517 Questions
1,056 Questions
713 Questions
416 Questions
354 Questions