Questions & Answers for: wd 57732 solid lamp light

WD-52525 New lamp-Code 34-Lamp abnormality? WD52525 w/known good lamp, does not light up at all, but sound is OK! I get error code 34, fans seem to be working fine! Anyone have the PS and light engine

WD-52525-Code 34-Sound OK-No picture! Lost picture, got code 34! Installed new lamp, still no picture! Checked lamp connector-ok, swapped lamps w/WD62525 lamp checked out-ok, tv goes through normal ...

...WD-57732. When I turn the TV on the sound comes on but no picture. It makes some "clicking" noises a few times and after a couple of minutes shuts down. The Red light is solid when the TV is off but ...

...WD-57732 LAMP continuously burns out. I have replaced four in two years. We don't watch alot of TV. There are a few issues here: The lamp you are purchasing could not be OEM, or a compatible lamp--OR ...

...WD-57732. The problem started I have a Mitsubishi WD-57732. The problem started with the lamp taking a long time to come on. I had sound while this was going on. It then went to the lamp would not ...

...WD-57732 Tv and it went out tonight. The screen is black but we can still hear the sound and it has a steady red light on. What can be wrong? check lamp it looks like your lamp went out, and replace ...

...WD-57732 TV. Where is it located? The thermal sensor is located on the lamp cartridge housing. here take a look at this link ...

...wd 57732 a solid yellow light on when turn tv on message air flow block shut down in few seconds shuts off with two green lights flashing and solid yellow acks as if room temp to warm. sometimes can ...

...lamp light thats solid red then the lamp or power board has an issue especially if you get a 34 error when performing the self diagnosis feature with the front panel buttons when the set shuts

...solid red light code 34 I have a Mitsubishi model WD-60737 and to make a long story short 1st time problem lamp replaced fine for a month til my uncle hooked a DVD player to my TV next day turned on ...