a o2 senser on a 2000 nissan altima Locarte iton exhaust manifld or pipe leading from the manifold. WD-40 the heck out of the threadsm disconnectt the two wire plug and use proper fit wrench to remove
...14 and 12 mm sizes because they are a nut and bolt design. It would be advisable to have WD-40 or a similar product to help free up the corrosion which often is found on exhaust bolts. The pipe to ...
My Nissan Almera won't start due to cold weather. this is the third time it's happened and each time the temperature has been below freezing. On the previous two occasions I jump started the car and ...
belt routing diagram for 98 altima just need a belt routing diagram for 98 altima On page 8-14 of the manual below: http://www.courtesyparts.com/pdf/1998-Nissan-Altima.pdf
one of my windshield wipers won't move when I turn them on two possibilities...one ..14 mm nut that scures wiper arm is loose.two..... worn wiper link arm socket.hope for the former its an easy fix ..
...system. if it has a distributor check the cap for moisture and cracks. if it does have a cap. spray wd-40 inside cap to displace the moisture. WD stands for water displacement. when its dry outside ...
fuse location for dash lights Guessing it's a V6. The instrumentation cluster receives power from two sources in the fuse block (junction block): 10A fuse 19 and 10A fuse 14.
gas lid won't close The white nipple won't popped up to latch the lid. How do I fix it? TRY SPRAYING WD-40 ON THE NIPPLE AND WORK IT BACK AND FORTH
Question about 2006 Altima
Plugs got wet with water and car hesitates to start and cut off? spray the plugs , leads and all other components wit a water dispersant (WD-40) blow off all water with compressed air
Question about 2006 Altima
What are the tools I need to change my starter on a 2006 Nissan Altima A screwdriver, rachet, an extension, and 8,10,12, and 14 MM sockets.
Usually answered in minutes!
1,587 Questions
1,450 Questions
1,306 Questions
569 Questions
534 Questions