Questions & Answers for: Ford Bronco II wd 12

1984 ford bronco 2 I have a bronco that i had to replace the motor in. I have 12 volts ever where, but there is no spark to plugs. what is wrong? could be many things like a bad connection to the coil

...wd, 6-cylinders, 1987 12/01/2008, Monday Vehicle running; came to stop & park; turned ignition OFF, however seemed as though engine was still running (dieseling?), restart was still possible at this ...

...wd / 6-cylinder 12/02/2008 // Tuesday, 12:15 am Logansautomo: Ref: I'm guessing starter would not disengage; was most likely burned out in the process; does this explain no lights of any sort? Tried ...

WHEN i shut the door it bounces back . i have tried to adjust pin sprayed with wd-40 , looked at drivers side door the door is not latching if the latch is open and its hitting the pin square it has ...

Is it a fuse if both driver and passenger windows of 1988 Ford Bronco don't work? Not necessarily. By the year of the vehicle it could be switches or possibly motors. Best bet would be switches. Check

...or low range. I took electrical connections apart ect. Help I also sprayed the connections with WD-40. Probably not that (only) cars dont like to soke, most likly it's the survo at the hubs not ...

How Much automatic transmission fluid does a 1986 Ford bronco 2 take with torque converter filled 6 to 8 complete system holds about 12 quarts.

...84 bronco 2 tranny mazda type 14 bolt pan in a 88 bronco 2 that originally had a 12 bolt pan both 4wd well if it is a 1984 tranny it is a toyo koygo tk4 or tk5, which if mounted in the 84 bronco the ...

I have a 1989 Bronco II V-6 with 4 WD that will not start. I have replaced the fuel pump, the fuel filter, and the relay switch but it still does not start. What would you suggest I try next? does it ...

starter wont start check battery, if 12 volt or more check fuse box if ok check starter wiring