Questions & Answers for: Ford wd 12

...12 hours later and nothing. It turns over but wont start. The next day I tried spraying WD-40 all over the plugs and wires (2 cans) and letting it sit for about 2 - 3 hours and still nothing. Now I ...

...wd, 6-cylinders, 1987 12/01/2008, Monday Vehicle running; came to stop & park; turned ignition OFF, however seemed as though engine was still running (dieseling?), restart was still possible at this ...

...wd / 6-cylinder 12/02/2008 // Tuesday, 12:15 am Logansautomo: Ref: I'm guessing starter would not disengage; was most likely burned out in the process; does this explain no lights of any sort? Tried ...

...12 volts at rest and then rise to approximately 14 volts. The voltage regulator (which controls how much voltage is being produced by the alternator and operates the charge lamp on the dashboard) on ...

...WD, digital display of odometer will appear to turn off. Odometer still registers & works, can see display at night but is very dim. Dimmer switch is not turned down. Display seems to go dark and ...

...WD-40. Ford Trucks and some Ford Cars seem to have this problem alot. This is going to be a tough one and I am glad to see that you tried some heat on that bolt. My favorite rust eater is PBlaster, ...

12 volts to the big two prong connector when you select 2 or 4 wd. if you don't it could be the relays under the hood. they are called clockwise counter clockwise relays. it could also be the GEM/ 4x4

...wd-40 or pb blaster, open and close doors to loosen up the switches. to see if radio goes off properly. if there is 12 volts to radio, it may be a bad ignition switch. try the doors first. then go ...

...WD. The therostat is stuck open and needs to be replaced. I have been told by a Ford shop mechanic taht we willhave to replace the whole housing at a cost of $250+? Does that sound right? Can I not ...

...12 volts on the work bench. Regards, Danny. replace the 4 wheel drive acuator if in 4wd with selector and the wheels are still free then the acuator is bad even tho you 12v  the acuator may not ...