Questions & Answers for: wd420 filter

WD420 Washer Drier has developed several faults.Firstly, Water leakes from the powder drawer, secondly, the machine stops before the rinse/spin cycle and this then has to be done manually, and finally

...wd420 washer dryer, problem is it tripped the main fuse board, the unit powers up ok and lights are on, but as soon as i close the door to wash or dry it trips the breaker again. i have cleaned the ...

...wd420 1200 spin - does it have a filter that would need cleaning regularly..? my washing seems to be dirty sometimes. The filter is to be found at the rear of the washer. Remove lower rear panel of ...

...wd420 starts fine and fills with water but it just runs the same part of the programme all the time plus the water will no longer pump out i have taken the pump out and cleand out the ball filter how ...

not pumping water out You nead to check the filter. Remove lower rear panel of washer. Remove large black hose on bottom of drum Remove and clean plastic filter inside hose. Remove hose onto pump, and

Really silly question, for the above model is there a filter, if so how do you change/clean it? Yes, there is a filter. Remove back panel, remove large black hose fastened to bottom of drum, and ...

...wd420. the door light is flashing the wash light is on constant and the machine wont work anyone any solutions please!! My WD 420 packed up, after watching the blogs I did:1) remove filter - found 2 ...

...filter on a Hotpoint Aquarius wd420 washer dryer? it is located at the back of the machine...are you encountering problems with this machine? check this link i will give you, this a forum/comments ...

changing filter Where is filter on Hotpoint Aquarius WD420

wd420 that is leaking. The machine is about 5 years old. From other posts I think the filter needs cleaning but we are having an issue finding out how the clip on the black hose can be undone to allow