Questions & Answers for: washing machines sometimes skips cycles

Getting flow rate error, but no evidence of problem After going through a wash cycle, the machine stops and the hot and cold lights flash. The manual indicates that the inlet hose screens may be ...

Ad

Question about LDF6810 Built-in Dishwasher

1 Answer

Food Odor Food odor builds up if dishes not washed daily, even though we rinse evrything thoroughly before loading dishwasher. No water remains at bottom - nothing appears to be stuck in drain. Any ...

Ad

Question about 24032\24036 Top Load Washer

1 Answer

I have a Sears Kenmore washer that sometimes does not spin in the spin cycle and sometimes it does. The timer progresses to stop, but clothes are still dripping wet. Resetting timer from spin usually ...

kenmore washer sometimes skip spin cycle but if you go back and put in spin it works put a new timer in it the relay stops on the contacts are weak

...sometimes it acts like it skips the spin cycle after a rinse leaving the machine full of water. It is a maytag about 6 years old, top load, good quaility, it is the model with the finger faucet and 5 ...

Question about Paykel EcoSmart GWL15

1 Answer

...sometimes keeps stopping and has to be restarted or skips cycles. Will replacing electronic board stop this? Hi,i think the problem you are experiencing is a pumping issue. 1.Check the hose to see if ...

Question about AES17AWF Electric Dryer

1 Answer

...cycles when it begans to start wash cycle it sometimes goes on to spin cycle Many select their own possitions for the timer to reduce water usage. Often it is border line where the spin cycle is ...

Question about AES17AWF Electric Dryer

1 Answer

...washing machine when in wash cycle works up until the last spin and then u hear clicking and the machine will skip the cycle and stop or sometimes just continue to the next dial cycle..i have cleaned ...

Question about AES17AWF Electric Dryer

1 Answer

...sometimes it works other times no If you timer switch "skips" the spin cycle (passes through it faster than normal) then it is probably your timer switch. Or it could be your transmission. The ...

...skips the drain and spin cycle - sometimes When i use hot water the machine will skip drain and spin. When i use cold water it will finish the job more or less fine, except there is a bit of water ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29492 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...