Questions & Answers for: washing machine trying turn isnt

washing machine trouble the barrel isnt spinning on my hoover quattro system 1300 washing machine...any ideas? thanks i need more info but can help front loader top loader brand etc ok thanks - will ...

...Washing machine pumps the water out while in the wash cycle.Then stops to refill to proper level and then continues to pump water out while in wash cycle. sounds like the water isnt shutting off once ...

...washing it is hot but the clothes are wringing wet when the cycle ends I have tried cleaning the pump but there wasnt anything blocking it any ideas? Is the fan working? this blows air across the ...

...washing machine. It is not working I have a Hotpoint Aqualtis washing machine. It is showing a fault code 05. Its not draining - I have turned off a mains and tried again 2 times .... please can ...

...machine fills up and see if this still happens. Chances are your fill valve isnt shutting off when its supposed to. You should also check for power to the switch after the unit starts the wash cycle ...

...to the machine? ? I did some washing went and hung up the load , came back and it was off and wont turn on... Please help.. Try unplugging the machine for a few hours to rest the code on the

I am getting an error it is as follows: finished, spin, and wash lights blinking plus 3 beeps. What does this mean? I placed clothes in washer closed the door and pressed start nothing happened I ...

...washing i tried to reset to factory setting but would not work. what can i do? tried to reset factory by pushing opt and phase at the same time didn't work this has happen before and it worked then ...

...turn off except for rinse and spin htc sensor isnt working i would recon perhaps the element isnt getting power did it trip your circuit breaker some times the htc fails all you get is machine stop ...

...turn the machine on, i press the start button and the pre-rinse light starts to flash. Then, instead of going to the Wash stage, the pre-rinse, the wash and the rinse stage lights turn on and stay ...