...machine draining the water but it does not spin. It will then go onto the rinse cycle where it will again spin both ways and then you can hear it start to drain and go into the final spin cycle but ...
refill back with water. The manual really says to unplug the machine and check all the connections, etc. I did a cycle earlier in the day with no problems. I have no idea how to check the hookups on a
...Starts normal wash programme and when it gets to rinse and spin it stops, pre wash light comes on, if I press the start button it will then progress to rinse and spin, but once it has done this it ...
washing machine refills after spin cycle After the spin cycle 'ends' and it should go to OFF, my machine refills with water and starts to spin and drain again, all the while still continuing to fill ...
washing machine refills after spin cycle After the spin cycle 'ends' and it should go to OFF, my machine refills with water and starts to spin and drain again, all the while still continuing to fill ...
washing machine fills makes a noise trys to agitate but never does, moves on to next cycle which is drain and spin, refills for the rinse, no agitation again then drain and final spin. Any ideas? Need
Question about Aquarius WMA56 Front Load Washer
...spin an it slowly started spinning until it finished a complete spin!!!!...dont forget to turn the temperature down again!!! Sounds as if the Pump and pipes may be blocked at the rear of the
Question about GLTF2940ES Front Load Washer
...final cycle; however it does wash. what could possibly be wrong and how can I fix this? Please remove power for a while and allow unit to drain out the residual voltage so as to reset. Now press down ...
Question about GLTF2940ES Front Load Washer
...refill, drain, and start that process all over again. I've leveled it over and over, but that doesn't seem to help. Samsung WA456 top loader, two years old Washing machines have springs to keep the ...
Question about GLTF2940ES Front Load Washer
starts refilling with water after final spin. It seems like the Rinse Hold is stuck on. Need to manually stop machine after final spin to open the door. How do I rectify this problem? I think you will
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions