Questions & Answers for: washing machine slow spine

...slow. there was a loud noise before it stop working. In all these Cases it sounds like a faulty lip seal. These special seals have Sealed bearings inside. Water gets through the seal and into the ...

Ad

Question about 24622 Top Load Washer

1 Answer

...washing machine It is not spining the clothes correctly they are still really wet wet and the machine is not over loaded . My washer will spin, but not spin out enough. It seems to spin too slow and ...

Ad

Question about 24622 Top Load Washer

1 Answer

Washer Kenmore 90 series Spining slow and then stops and It won't sping again and smell like something is burning. What could it be wrong? Motor windings have leakage. Replace Motor.

...slow to spin in spin cycle belt is tight pump starts right away The motor could be on its last leg of working. You can also check to make sure that the belt is not binding against anything under the ...

Question about NAV5805A Top Load Washer

1 Answer

Not spining out good. Looks like its spining slow Make certain that the spin speed is where you want it (e.g.: high spin). Also, make certain that you aren't overloading the washer. A heavier load ...

Question about WD1000 Front Load Washer/Dryer

1 Answer

...washing machine will not fill, only hot or cold will fill or is slow to fill then read these tips. I have covered many of the things that can happen in these tips? Washing Machine Problems No Water ...

Question about WD1000 Front Load Washer/Dryer

1 Answer

washing machine will not spin. Power still among the clothes. Simpson 22s750n so when does it not spin when there are alot of clothes inside it heres a test to do put your unit on spin stick something

Question about WD1000 Front Load Washer/Dryer

1 Answer

...washing machine, reasently- transmission changed,worked OK, Washing - draining OK,spining scycle starts slow then stops, no spining at all .Clutch working OK .How to fix it. Thanx for any adv. Steven ...

Question about WD1000 Front Load Washer/Dryer

1 Answer

My whirlpool washer front loader is not spining, when i turn on I can hear the motor sound but inside is not moving. Please help me how to fix it. Thank Possible that the belt had jumped off or has ...

Question about WD1000 Front Load Washer/Dryer

1 Answer

washing machine. If it is under loaded then the drum will spin out of balance because the weight is trapped to one side. regualar use like this will break the drum bearings. Weighty things like towles

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...