Questions & Answers for: washing machine h20

H20 errors on Hotpoint WD640 Get H20 errors while washing or drying. Using Y connector and can confirm water is getting into machine this is normally a water valve problem

H20 error messages H20 errors while washing or drying Did you resolve this problem ? If so, can you let me know how ? h20 is normally a water valve problem please check these regards jason

...the machine is a hotpoint aquatltis aqxxf149pm h20 means no water is getting to the machine. check your washing machine taps are on and water getting to the machine and the fill hose is not

my hotpoint washing machine will not wash and is flashing h20? H20 is a fill fault. check water taps are turned on, inlet hoses are not kinked. if ok then a possible fault with the inlet valve(s).

...washing Machine The error indicates a problem with the incoming water supply. Check for restricted or kinked inlet hose/s, check that tap/s are fully turned on and that you have adequate water ...

...washing machine H20 error code I have an Indesit Evolution W16s washing machine and keep getting error code H20. It has been like that all day and I keep trying to get it to finish cycle. All the ...

...washing machine At start of wash water comes in through 1st compartment of soap dispenser, then drum turns as normal. Then for main wash water goes through soap compartment but doesn't stop ...

...h20 left in machine? Next steps after bleach/hot h20/cleaning products and vinegar have had little affect. Pull apart to clean up by hand? Thanks Use it, run a wash of dirty clothes of low value on ...

...washing machine showing H20 code showing h20 is the clue water is also known as h20,so your problem is the inlet valve letting the water into the back of your machine needs replaced or water pipe is ...

...washing machine 2 years ago. I only used it twice. Decided to use it again: however my problem is that I can't get the H20 to flow into the tub at all. Can you help me? Just to be sure that I'm ...