Questions & Answers for: washer triac

...washer does not spin...anymore. i do not have the manuel and i do not know what is wrong....5 everything looks good.... please help. thanks I think you have what's known as the "R11 and Q6 Problem". ...

Ad

Question about 24 in. DE73 Evolution Free-standing Dishwasher

2 Answers

Triac incorrect operation closed/open circuit - Wash Cycle completes but with Dispenser Lid notfunctioning correctly H20 = Static 'Fill Time exceeding 6 minutes - cheek for blockages/low pressure Code

Ad

Question about Neptune MAH5500B Front Load Washer

1 Answer

...washer model #MAH4000AWQ Keeps running at the end of cycle and we have to hit the stop botton for it to quit ? Please help The famous Q6 and R11 failure can cause this issue. Have you replaced the ...

Question about Aquarius WD640 Front Load Washer/Dryer

1 Answer

it says error code f-01. what does it mean Triac motor faulty or faulty motor. I had the same thing, technician said it is triac motor (150 pound) turn out to be the motor it self (about half the ...

Question about Aquarius WD640 Front Load Washer/Dryer

1 Answer

...washer dryer it said F01 the Motor triac fault. as far as i am aware the triac as something got to do with one off the relays it sends one of the in reverse or something like. I know where the triac ...

Question about Ultima WF860 Front Load Washer

1 Answer

code f-01 Hi. F01 is pointing at a fault of the motor triac. The motor triac is part of the control assembly and controls the motor. Try disconnecting power cord. If the fault code comes back, then ...

Question about ZWF1430W Front Load Washer

2 Answers

Zanussi washing machine ZWF 14581 error code 43 is showing up. How can I reset the machine so that it works normally? Hi from retired Englishman in SW France, Zanussi code 43 states 'problem with ...

samsung j1253 wont empty cleaned every hose filter relaced pump and a new triac on display board still wont empty what to do next my front loader samsung j1253 will not empty we have cleaned every ...

washer-dryer has a fault code F 1 and says the machine is blocked The machine would not come on saying that it did not have water. The door was locked so I removed the kick plate and manually unlocked

...washer error code E11 means motor triac short error. The motor control triac is a small component mounted on the controller and is used to switch your motor on and off. Check the mains supply, the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...