...scraping noise from drum,what is it? My washing machine makes a very loud scraping noise when the drum is moving,even when i turn it by hand,could it be the brushes?. more likely there is a bra wire ...
...drum out. Thanks for your help. Most washer models have snap-clips holding the front of the top panel down, with hinge-like clips at the back. Carefully pry up the top panel on the front of the ...
...washer fixed? The reason I ask is because I have the same problem. Thanks Try lifting the inner drum to check if there is any movement between the inner and outer drums, also turn the drum and listen ...
...drum from hitting the walls of the washer. Could very well be the pump as well. These pumps have been notoriously bad for the pully shaft housing slipping down and hitting the pump pully. More that ...
Question about GLEQ2152ES Electric Dryer
...drum area. I purchased a Frigidaire Gallery Series electric Washer/Dryer Combo 4 months ago. The dryer model # is GLEQ2152ES1. When I turn the dryer on, I hear a wire scraping sound coming from the ...
Question about Duet GHW9150P Front Load Washer
...or should I just go and buy a new washer? go buy new washer the drum bearings have gone and it really is not worth repairing . it can be repaired but always found that it never lasts long once
...MAKES A SCRAPING NOISE the drum belt is broken and this lets the belt tensioner ride on the motor shaft which gives you the scraping noise,you need to remove the front and top cover to replace the ...
...drum by hand. The washer is two years old. front loader affinity model. does the drum move as you spin it (if so poss stuts) makes a scrapping sound Just check to see if the drum moves more than it ...
Question about HE2 Plus Front Load Washer
...washer. Could be the drum bearings are failing or the tub suspension has broken or become detached but in the case of the latter it would usually be noticed the drum alignment would be changed and a ...
Question about HE2 Plus Front Load Washer
washer if it makes a scraping/screeching sound when the spin cycle starts. Sounds like maybe a coin or piece of metal is stuck between the drum and the housing. You can, but I wouldn't. The outer skin
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions