phone is clicking when i dial. i believe the model # is 6031 cordless vtech. it is less than 1 year old. this is the second time it has happened. i contacted you once before and was given instructions
...vtech phone back in december and had no problems up until now,i live in bc so my phone company is telus i have internet high speed adsl and telus tv and as you can see i still have internet and also ...
Question about DECT 6.0 Cordless Phone with Digital Answering System
...just the phone to the phone jack directly using a new cord. Still get a dial tone but cannot call. check dialing mode matches what exchange is set to DTMF suspect phone is set to dec = decadic or ...
...the number dials and then it goes right to the dial tone. It doesn't ring the number, just goes to dial tone. it's not sending a signal to the phone service check your phone lines for proper ...
Question about Two Line Digital Answering Machine Phone
...vtech 6772.It is a three phone combo other two phones work fine HI, To switch back to tone dialing, hold down the SELECT button for couple of seconds. The display on the base unit will read PU ...
phone up, no dial tone. Display says line in use. People calling in say it rings, but answering machine doesnt pick up and I can't call out either. Also, there's a loud static noise when I try to dial
Question about DECT 6.0 Cordless Phone with Digital Answering System
...phone number and then press "talk", the numbers dial extremely quickly, a dial tone comes on, and I have to enter the numbers again. How do I fix this? It is a Vtech 6.0 DECT. Usually there are two ...
Question about Cordless 6041 Phone
...vtech home phone says no line on display when i plugged in a chorded phone it worked what does it mean Brent I bought my mom the same phone for her birthday plugged it in it had no dial tone. I read ...
Question about DECT 6.0 Digital Cordless Phone
No dial tone...line in use appears on screen There is no dial tone on any of the three handsets. The base unit screen says "line in use" you may have a broken wire somewhere or a bad jack
...all phones no dial tone does the base unit have a dial tone . if no then you need to contact your land line phone company of course assuming you have it plugged into a phone line coming into the ...
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions