vtech i5858 i can with the base but not my cordless handset. the handset displays a message that says "Unable to Connect" while beeping. I had the same issue and by changing the battery my problem was
...vtech devices. These are not working. Lights are there. Voice is cracking very badly , i can not hear anything, sometimes handset goes to searching mode Have you tried putting in freshly charged ...
...connect to the base unit... Vtech DECT 6.0 Dual Handset Cordless 6041 Phone, the base will ring but the phone is stuck on "Connecting" I tryed unplugging it and plugging it back in, and that didn't ...
Question about VT 40-2420 Cordless Expansion Handset (VT40-2420)
...connect the 4th handset. Afterwards the LED indicated 'Searching for Base". I bought a new battery, reset the phone system (VTech 2431), and place the accessory base near the phone system. The phone ...
...vtech 5867 handsets is frozen. It is stuck on one caller id. Battery is charged. What to do? Have you tried re-establishing connection with the base unit? Try setting it on the base and wait for the ...
Question about 5.8 Ghz Handset Cordless Phone System with Digital Answering & Caller ID
...vtech phone (many times) a beeping handset indicates a low battery or an inability to connect to base station. check to make sure the battery is connected correctly and that the phone is setting in ...
Question about Vtech Cs6429 - Cordless Phone
The handset says Handset 1 No Line - what does that mean. I can't get a dial tone it means you need to have an outside line connected to the base of it .
how do I reconnect a handset? battery went dead- replaced it, but now the handset only says "connecting.." http://www.manualslib.com/manual/188008/Vtech-I6789.html
Question about i6789 Cordless Phone
my vtech base and handsets serial numbers are same , but my handsets are displaying no power at base/out of range, what to do Plug base unit into mains and connect the phone socket!
Question about i6789 Cordless Phone
...VTECH HANDSET ARE displaying no power at base and out of range, base and handsets serial numbers are same, how to resolve this issue>>?? Plug the base unit into the mains and connect the phone
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions