Questions & Answers for: volume power buttons work insignia

power button. THIS INCLUDE THE CONTROLS ON THE TV ITSELF!!!! The volume doesn't work, the menu button doesn't work. The input button doesn't work. I have never heard nor seen anything like it. My only

...volume down turn the tv off. and the power button selects only channel 4, NEED HELP PLEASE Need to program my Insignia TV to my Direct TV remote. Need code 0463 worked for me The Insignia is-tv040919 ...

...power, volume, and stations for my Insignia with the bell remote. Hold tv button till all 4 lights light up and then press 660 # and everything (minus the menu option) should work. I also tried these ...

power button or remote , must unplugpower even the volume is stuck . i cannot turn up or down the volume or change the channel. funny thing is the tv will still work fine but i cant change the channel

Power button works from my remote but not the volume or any other Tried to turn the volume up from the television itself but only the power button works Last time I had this problem - on exactly this ...

...volume, or source... the buttons on the side will not work either... only power button and remote power button You may have main logic board gone out. Please see my basic troubleshooting guide here: ...

...volume bar stays on the tv and cannot be adjusted. It sounds like it has main board problem, leave it unplug for about an hour to let it reset itself to see if it will work again. It can also be ...

...volume unlock with a RCA universal remote I do not own the original remote. The sales rep at best buy said to get the RCA universal remote so I did. Try this solution by another user: timyorba 1 ...

...Power is on. I checked unit with two different TV's thru rca inputs. I also checked with an mp3 player on auxiliary input. Since there is no display on the unit, I assumed the input selector was ...

...Power button and up volume buttons work on side of TV. No other buttons work. Can use remote to change everything on tv. The button itself may not be making contact with the circuit board under ...