Questions & Answers for: vitamix blade bearing

...Vitamix My opinion is the blade assembly in the container, is the problem. The bearings and/or seal is locking up and in turn the motor of the base has to work harder. You will need a special wrench ...

...a bit loose then you will be buying new parts to repair it. The only other possibilities are beaker cracked and leaking (new beaker) or bearings & seals worn (new blade & bearing

Vitamix TNC 60 oz container leaks when in use. how to replace seal and or bearings? If it is not the HUGE blade retaining ring under the beaker a bit loose then you will be buying new parts to repair ...

repack bearings On the Vitamix blender models we have here in NZ it is not possible to repack the bearings, you just purchase a new blade assembly complete with bearings and the driving clutch.

...blade bearing on Vitamix Blenders? The blade bearing is leaking grease and I want to repack it with food grade grease. How can I remove the seal so that I can clean and repack the bearings. On the ...

...blade assembly complete with bearings. That's the only way Vitamix sell the bearings, complete with blades. Some folks have pulled the old blade assembly apart and purchased and fitted aftermarket ...

replace ball bearing how to assemble th bearing and blade assembly on a vita mix 5000 Need special tool: check here: Amazon com vitamix wrench assembly Home Kitchen

vitamix 3600 throws sparks when turned on when turned on, sparks fly out from gap between container rubber mount and base. Sounds like it may need a new blade/bearing assembly or coupling or both.

...vitamix leaking? Probably the bearings in the blade assembly are wrecked, replace the blade assembly with a new genuine part. Someone here has fitted aftermarket bearings but I do not know how much ...

...vitamix 5000 unit. Blade assy makes noice ; is loose. Where can I buy the set of bearings for the blade assembly? You will need to source them from a bearing supply company as Vitamix only supply the ...