Question about COMPUTER INTL P5SD2-VM MBD MATX LGA 775-SIS 672 968 VGA FETH (610839154845) Motherboard
...signal on the display. I have onboards graphics in automate mode( bios doesnt allow any other options) and my Mobo is compatible with pci-express x16 VGA card. 2 GBs RAM DDR1 PE4 3.2GHz PSU 500 Watt ...
...VGA).. Not sending signal Integrated Visual (VGA).. I am putting my computer together but I can't instal the operating system because my Monitor isn't receiving a signal. I also have a Video Card I ...
...well did you check weather the video card came with a VGA pin where you can connect the monitor signal cable if not , connect the monitor signal cable to the video card VGA out socket. good ...
...VGA port to a ACER netbook and all I got is 'No signal'. The on screen menu don't work if no signals are detected. I try the Acer on another monitor or TV using VGA port and it works fine. 2007 ...
signal vga/dvi. Signal was on onboard vga only. Option PCI/internalVGA is in BIOS enabled. Graphic card is OK - tested in other PC. thanx you said video(graphic)card is ok in other pc,may be the video
...signal from the video card to the monitor. That is why you need to check if the VGA cable is fix to both end. If that did not fix it, you will need to open the casing of your computer. Disconnect the ...
Question about MB P5KPL-CM C2D LGA775 INTELG31 ICH7 DDR2 PCI-EX16 FSB 1600(O.C.) 10 Motherboard
...vga signal runing in computer & sudernly computer display show in no vga signal Either your graphics card is going bad or your monitor is going bad or your connection is lose. Just check your ...
Question about P5GC-MX/1333 Motherboard
signal Vga no signal Component no signal Could be a bad monitor and if not, then the graphics card if it has one, if not the motherboard connection. Try it with another monitor to rule out the monitor
Question about P5GC-MX/1333 Motherboard
...then it said NO VGA Signal.. if there is a graphics card in your pc than you should connect VGA cable to graphics card. may be you connected onboard graphics. just check hope that it will help ...
Question about P5GC-MX/1333 Motherboard
...vga signal. Same if set for HDMI input: no HDMI signal. I would check your source for why it is not sending signal rather than why the monitor is not receiving. Of course, that being said, is this a ...
Usually answered in minutes!
1,358 Questions
703 Questions
590 Questions
517 Questions
494 Questions
