Questions & Answers for: vga save

Question about VL17151 17" Flat Panel LCD Monitor

1 Answer

...Save the BIOS turnoff the computer and plug the monitor into you vga card. That should do it. To change it back to your motherboards vga just reverse the instructions. Let me know what happens. Good ...


Question about Flatron L1951S-SN 19" LCD Flat Panel Monitor

2 Answers mode" in a blue box then it goes to sleep. Any perticular reason why this may be occuring? Are you connect via Analog (Blue VGA connection) or DVI (White Digital connection? If you are connected ...


Question about L1915S 19" LCD Monitor

1 Answer

...The monitor doesn't receive the signal from the PC. It is either the PC not booting up or the VGA coard is faulty. Change the VGA coard. or try reseting the VGA

Question about VL1918 Monitor

1 Answer, but only if I am certain it is not something easy to fix. Thanks Tom Bozeman Montana Check the VGA cord that connects from the PC to the LCD, try putting VGA cord properly to the LCD and PC, or ... moved. It's not on power saving mode, it does not sense that it's already is plugged at your VGA. The only thing to test it out is to have another monitor/computer *to see which one is not ...

Question about Desktop Board D845EPI Motherboard

1 Answer

...and disable onboard vga . Then save settings of bios and exit. Then your onboard vga is disable so you can install vga card into it. Let me know if you need further assistance. Thanks for using

Question about E176FP 17" LCD Monitor

1 Answer

...of restarting the compujter to finally get it working. It will happen when your are using two VGA card adapter plug-in into your computer. The one is built-in and the other one is plug-in into ...

Question about Evo N800V PC Notebook

1 Answer

...vga driver,,when it asked you where to download it to go to the usb device ,,dont run it,,save and download,,then put it on your laptop,,you may have to connect laptop to a tv or other device so you ... the mother board, still has the same results. The message it is displaying indicates that a VGA cable is connected and is not sending signal, or is sending a Monitor Off signal across the VGA ...

...cord between the monitor In the center of the screen it reads: D-Sub out of range 68.5Khz/85Hz VGA Port or Power saving mode HDMI Port I have a LG Flatron E2750v Monitor connected with dist tv ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6691 Answers

Are you a Computers & Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides