Questions & Answers for: Husqvarna vent access

...access to the vent. The vent tube can then be pushed out from inside the tank with the use of long needle nose pliers, but be gentle. I just loosened it then pushed it out with a finger. I put it all ...

vent in the cap. Clean this and check/clean/replace the spark plug. If this doesn't get you running well, do the following: Check that you have an adequate fuel supply to the carb body. If 'no', clean

...specific Honda engine you may have. Also be sure you have fuel flow to the carburetor, if the tank vent in the cap is not working properly you can lose fuel flow to the carburetor. Hope this gets

...a set of pliers to remove the vent if the vent its self is not threaded in there...if its threaded in..just screw it out ..you may have to losen the antivibe rubbers to gain access to the

vent. I took cap off and blew in fuel line it blows fine so the duck breather is plugged. Does anyone know how much of the saw I need to take apart? or can it be acce easier? From memory, the breather