Questions & Answers for: vcr starts shuts

...is a short in the wiring? I,m sorry if not help you, but some those combo system when the Vcr have problem or stuck it shuts down, then you have to fix the Vcr frist. zcheck if the Vcr is ok. ...

Panasonic VCR stop Hi I have a panasonic vcr (PV-V4524S) it was working fine till last week. when we shifted it from one room to another. now when i start power the vcr is okay but when i put a ...

starts to back up by the capstan and then it shuts down. Sometimes, if I hit PLAY a second time it will work OK. the vcr is on threshold of belt life. try replacing (or cleaning with alcohol) the take

VCR's has a sensor that monitors if the take up reel is turning. If it doesn't turn for a few seconds then it shuts down. The most common problem is the idler tire (or clutch) starts slipping too much

...vcr junk. well sounds like one of the players is not in correct spot thus shuts down (kinda timing issue) see if there is anything preventing it from going jiggle or turn upside down see if you hear ...

...shuts off for no reason. I haven't done anything different to my dvd recorder/vcr combo. There is nothing stuck in the vcr or dvd player. I don't no what to do. Please help. thanks Crack the top open ...

I have a sanyo DVW-7200 of which when I put in a Tape it starts to play and then shuts down the complete vcr/dvd combo unit. They have the ability to shut off when anything is not right.

VCR ruining tapes by catching tape also shutting vcr off. What is cost of repairing? i will say that $70 to start reviewing it.... you are better getting a new one, they run very cheap now.

shuts down after 6 seconds of operation DVD/VCR Combo was working fine then one day machine started shutting down after a few seconds of operation. It happens with both, a VCR and a DVD. I can watch 6

i need instruction to set recording for sharp h952 vcr You need remote to get menu to set the clock then go to timed recording setting. Then you load a new tape, then shut down the vcr and wait for ...