sound. Vcr tape the same way. Tvs usualy have a few ways to hook them up. One is a coax cable this is the silver one in the back that you screw in a cable. The second are RCA cables these are the ones
...Phillips: DVDR3545V/37. I bought it to record my VHS to DVD; however, I haven't tried this, but when I play a VHS ( I have tried several- even a new one) and the machine makes noise. You can see the ...
...sound appears on the TV. What are we doing wrong? I'm not sure if you've done this yet, but this might work.. goodluck to you... let me know if it helps I have a phillips DVD/VCR DVP3340V I lost my ...
...tape. If you want to see the vcr`s picture on channel 3/4 you have to tell me if your using a cable or sattelite box and then I can tell you how to wire it with the coax cable, let me know, BMW ...
vcr combo Hey Sandrew i was wondering if you could help me with this solve. I am not very learned when it comes to tv repairs. This is the problem i have a Phillips Model ccb190at34-ac120v, 60hz90w. i
...the dvd in there is sound but no picture. I have not touched any of the cables at all. try here see if the codes are the same as you entered . video help enter your model in to the search bar .
Question about EWD2003 DVD Player/VCR
...vcr with the rca jacks on it and put rca cable from dvd out to rca vido in and audio in then hook up your anti cable out to anti in on tv.should work cam corders do. I have an older model 32 inch tv ...
Question about 60P8341 60" Rear Projection Television
sound, power light stays on The tv was working fine until I disconnected it from the cable and vcr. When I reconnected it, the power light comes on but the unit doesn't power up = no picture, no sound
Question about 60P8341 60" Rear Projection Television
...a 50" Phillips smart tv. I've tried to hook up my Sylvania DVD / VCR player. I have sound but no picture. PLEASE HELP!!! Hi Teresa, what type of wires are you attempting to use to hookup your
Question about 60P8341 60" Rear Projection Television
VCR player to the TV. There is sound but no picture. Please help me!!!! You did not plug in the Power Cord, or you did not plug the DVD/VCR in correctly, or You are on the wrong Source, or the DVD/VCR
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
