Questions & Answers for: vcr mode switch

Question about EWC1304 13 in. TV/VCR Combo

1 Answer

...VCR wont insert, tape in light on, make noise when turn on while tape heads turning, than stop. Hard to say what is wrong but have seen a lot of problems with the mode switch in these models.the mode ...

Ad

Question about HS-U545 VHS VCR

1 Answer

...VCR to go to the mode where you can select what you want to record. The remote does play the tape but nothing else seems to work. The batteries in the remote are new. I realize the VCR is old but was ...

Ad

...ITS SELF. Often this is caused by a faulty mode switch in the VCR. The mode switch tells the microprocessor of the VCR what position the vcr is in, so when it goes wrong the whole system goes

...mode switch. This tells the computer chip what position the VCR is in. It can go out of phase due to dirt (Just spray the Mode Switch with Servisol video 40 to cure that). Or it can go out of phase ...

...with Servisol Video 40. When you fixed the carriage also, you did get put it back right, in the correct position, otherwise the VCR will think it's in the wrong mode, even if the mode switch is

Question about M665RB VCR

1 Answer

mode the VCR is in. If this switch goes wrong ie: it sends out wrong position message, the electronics powers the machine down. So your machine could have a faulty mode switch. However the mode switch

VCR's have a mode switch which tells the electronics what position the mechanism is in. If the vcr can't perform correctly the mode switch tells the electronics to shut down. However mode switches can

...VCR is a device called the Mode Switch. This tells the electronics which position the VCR is in. This Switch rotates with every movement of the VCR. When parts of the VCR mechanism are moved out of ...

Question about SLV-765HF VHS VCR

1 Answer

mode switch in a VCR tells the electronics what position the mechanism is in. Sadly if this malfunctions the VCR will do something else when say pressing play. The Mode switch can sometimes be cleaned

...goes wrong with the mechanical system or the mode switch itself then the VCR system gets the wrong message on the position. The VCR mechanism needs to be checked for damage and the mode switch

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...