Questions & Answers for: vcr door panasonic

door and cannot eject. If I turn off and then turn on the VCR the error code disappears. Then I press the eject button and simultaneously hold the door fully open with one finger until the tape starts

door, and gently depress it with a pen point for a couple of seconds. If this does not work, try calling Panasonic. I was unable to eject my dvd from a Panasonic VCR/DVD PV-D4742 model.  The

...VCR player but when i hit eject, it didn't come out. Any suggestions of things to try that might help me get it out? Your machine probably "locked up". Use a toothpick, or some similar item to press ...

...door flap comes down the DVD holder won't eject out? ...

dvd door will not open My trutech DVD player door would not open. Dvd door will not open. Had electricity go out and dvd open/close will not work.

vcr with the power off. Now, the door is stuck open, and the slot where tape goes was pushed back and is stuck in place. Waswondering how to repair this problem? oN THIS VCR THERE IS 8SCREWS TO REMOVE

...DOOR AND VCR DOOR WILL NOT OPEN, DOES NOT EJECT TAPES OR DISK ABLE TO INSERT DISK OR TAPE IN AND PLAY, JUST UNABLE TO HIT EJECT BUTTON AND DOOR OPEN TO EJECT UNITS OUT. PLEASE HELP. I have had some ...

...VCR This is the second time this message has come up. The first time it was repaired inder warranty. Ironically, it expired in March. the machine makes a grinding sound then the DVD door opens. The ...

dvd door won't open DVD door won't open. Display says "open" & "close" when button is puched, but nothing happens. Have tried all troubleshooting steps in manual. sure its a caused of stock up. ...

...door open on the front or is it loaded from the top. You don't specify the adapter you have, but most load from the top. The main thing here is that VHS and VHS-C are both the same size of tape. ...