Question about 2001 XG300
...Variable Intake Motor (VIM) to control the opening and closing of the additional throttle plates called the Intake Control Valve (ICV). At low rpm the (ICV) is closed and, as rpm increases, it is ...
...light on, showing the following codes. P0715 Inpuet/Turbine Speed Sensor Circuit and P1159 Variable Intake Motor Fault What's my problem? clean up all ground wires but you may need both of those ...
Variable Intake Motor Malfunction P1191/P1193Limp Home Valve - Low RPM First, clean the throttle body and check for anything which might obstruct AIR FLOW to it. The P1159 is the Variable Intake Motor
...Variable intake Motor is the problem in most of the cases I have read. The motor functions correctly it is the worm and gear that is the problem. This is all located on the opposite end of the intake ...
the engine light has come on need to have shop or auto parts do a fault scan to determine what failed. Could be simple glitch but don't put it off, if there's a problem "they don't fix themselves" Go ...
...variable induction motor rotation.. plastic gears stripped on the variable intake shaft-motor gearset.. PCM drives motor, sensor is watching shaft movement, but no movement seen.... $500 for intake ...
...variable intake motor P1159, replaced it the code go away, which i am not too sure in the first place, then showed off the MAss airflow meter, cleaned it, that code go away. However the same problem ...
...variable intake motor fault? code 1159p where is it located? I believe that this may be the throttle body. Follow the tube/hose from the air filter to the engine. The throttle body is the unit that ...
Usually answered in minutes!
506 Questions
21 Questions
