Questions & Answers for: valve ticking

Ad

Question about Motorcycles

1 Answer

ticking sound in the valve train. i have changed everything in the valve train but the noise is still there, when the engine is ideling it is very loud, and when im around 2500 rpms i can hear louder.

Ad

...Valve Adjustment & Oil Pump Replacement are expensive jobs... What should I do? Should I join AAA and get a full car inspection? (BTW: the ticking sounds like it's coming from the valves) Most ...

Ad

Question about 2003 FXD Dyna Super Glide

1 Answer

...valve covers Your ticking noise could be most anything. You didn't tell me how many miles are on your bike. Now, on top of the head you have the typical stuff that's on all four cycles engines with ...

Question about 1981 GL 1100 Innerstate Gold Wing

1 Answer

pitted valve stem tips can also cause a ticking noise. In any event, do not run the engine with less than the specified .004" valve tappet clearance as this can cause valve damage and compression loss

Question about 2000 ZR-7

1 Answer

...The bike has, 3,800 miles on it and had sat for a few years prior to my buying. I'm sure the valves have never been re-ajusted after the periodic mantinace chart schduleing. What might help ...

valve guides while its running  and show up as a ticking noise with the gas applied.have the top end service done which cleans the fuel system injectors and any carbon build up on the back of the

...your car to tick. No, this will not cause a tick.  A tick on this car is most likely a worn valve train and this is a common problem on this car especially with high milage and poor oil ...

Question about 1998 VT 1100 C3 Shadow Aero

1 Answer

There is a tapping sound from the engine, could this be the valves needing adjusted and how harmful is this? This seems to be a common issue and almost certainly has to do with the non adjustable ...

why is there a loud tick tick ticking sound coming from my 2006 kia sorento LX check valves put screwdriver to valve cover and put your on it if ticking adjust valves. mike

...It wouldn't start with bent valves. If you have changed the cam belt and not set it correctly then you may have damaged the valve gear but the ticking is likely to be a worn camshaft or dud

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6229 Answers

Marvin
Marvin

Level 3 Expert

85231 Answers

richard libby

Level 2 Expert

209 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...