Questions & Answers for: GMC Jimmy vacuum line

Question about 1997 Jimmy

5 Answers

vacuum line tap into under the hood? Did you made any changes to the fuses lately. Sir, the vacuum line can be found under your kick panel which is located above where your feet would go when you were

Ad

...vacuum line tap into under the hood? Comment by schochiometr, posted on Aug 24, 2008 No changes to fuses. I rechecked all fuses and they're good. Comment by schochiometr, posted on Aug 25, 2008 To ...

Ad

...vacuum line and plug.  With no vacuum pulling on the actuator the 4wd will disengage.  The problem is "why is there vacuum to the acuator when there is no call for 4wd" Is it the module in ...

...vacuum line diagram. I have a loose vacuum line that appears to be routed behind the distributor cap area, firewall?? THat goes to your map sensor. If you look very closely under your hood there will ...

...vacuum line to your HAVC system. On the drivers side by the corner where the windshield meets in the engine compartment, there is where your vacuum canister. Follow the vacuum lines and look for any ...

Question about 1996 Jimmy

1 Answer

...line that goes to a vacuum operate actuator under the battery. You will have to remove the battery tray and battery to get to it. That is a large diameter vacuum hose that has to make a sharp bend to ...

Question about 1995 Jimmy

1 Answer

...easy.What usually happens is it sticks in.The vacuum line connector attaches to this switch.There are 3 vacuum lines on this connector.Hope this helps.Let me know if you need more help.Good

Question about 1995 Jimmy

1 Answer

...vacuum line, look under your hood (close to the cowl panel) for a disconnected, cracked or broken vacuum line. In some rear cases, it could be the vacuum switch (in dash). Or vacuum diaphragm (under ...

Question about 1997 Jimmy

1 Answer

problem. If you have a broken or leaking vacuum line in the engine compartment it will stop functioning as well. If all the vacuum lines check out and the valves then your controller is malfunctioning

...line on the truck or using a vacuum pump) to see if the solenoid is working properly. If that works, you will need to recheck ALL vacuum lines. You could also check for DTCs to see if it might be a ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 GMC Jimmy
2000 GMC Jimmy

1,363 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

1998 GMC Jimmy
1998 GMC Jimmy

1,127 Questions

1999 GMC Jimmy
1999 GMC Jimmy

1,104 Questions

2001 GMC Jimmy
2001 GMC Jimmy

838 Questions

Manuals & User Guides

Loading...