...va to run it. I am also confused as to the voltage. It appears to run on a DC voltage from 1,5 to 90 volts. I need to confirm the voltage and know the VA. Thanks HOW MACH COST THIS RADIO? I HAVE ...
Question about 42DPC85 42 in. EDTV-Ready Plasma Television
...see if the VA and VS Voltages are correct. there will be a sticker inside the panel showing what the VA and VS voltages should read. On the power supply the Voltage will be marked by the
...(cn810, cn809, cn808, cn807) and you should get dc voltages at test pin (Vs 207VDC) and test pin (Va 63VDC). If you do not get these voltages at these two pins you should replace the SMPS borad. My ...
Question about 50MF231D 50 in. Plasma Television
...that you can read, the VA voltage and The VS voltage. There will be a label on the inside on the back farme that will tell you what the VS, VA, voltages should read on the output of the power
...caps that might need to be replace in the power supply. You can and also check and see if the VA and Vs voltages are correct coming out of the power supply. There will be a label on the inside ...
Question about 42PG60 42 in. HD-Ready Plasma TV
...(cn810, cn809, cn808, cn807) and you should get dc voltages at test pin (Vs 207VDC) and test pin (Va 63VDC). If you do not get these voltages at these two pins you should replace the SMPS borad. My ...
Question about P50T501 50 in. Plasma HDTV
...Va Ans Vs voltage from the power supply will drops.you have to measure using a multimeter is there is any short circuit in its power supply in put point. When the voltages from Va and Vs point are ...
Question about P50T501 50 in. Plasma HDTV
...does any boards need to be plugged in to the power supply boardBN44-00687A in order to output VA & VS voltages? Have tried plugging main board but still nothing. Hi Jesse, In order to get the ...
Question about P50T501 50 in. Plasma HDTV
...plasma tv that is getting green and red sparkles on the screen. I've read that you could adjust various pots on some broads to help with this. On my model there is only Vs and Va (the is also a ...
Question about P50T501 50 in. Plasma HDTV
Voltage address VA should be 60V but I'm only getting 51.6, I tried the VA adjustment But can still only get around 55V max...any suggestions please I have already replaced the IC301 voltage regulator
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions