...Sump pump, and it pumped out the intial tub of water. But the pump continued to pump and wouldn't shut-off Hi Ron... Check your float switch....sometimes they can get stuck to cause this problem ...
utilitech sump pump Not running See if there is power. If so the level switch might be stuck off. If that is OK then the pump motor has probably failed.
Question about 1/3-HP Cast-Iron 95 GPM Sewage Sump Pump 58117-UTL1
sump pump will not pump water, won' turn on, floater up There are a few things that could cause this problem to come up. Pretty much all of them do require taking the sump pump apart a bit though. I ...
Question about 1/3-HP Cast-Iron 95 GPM Sewage Sump Pump 58117-UTL1
Can I set a Utilitech 0.33-HP Thermoplastic Pedestal Sump Pump flat on the concrete to pump out water Can it be set flat on a concrete slab to pump out water? yes
Question about 0.33-HP Thermoplastic Submersible Sump Pump PPSP33
Sump pump does not go on all the time have to shake pipe to get it going so water doesn't overflow There should be a float switch in the pit, sounds like its getting stuck and when you shake it it ...
Question about 0.33-HP Thermoplastic Submersible Sump Pump PPSP33
...utilitech 3/4 sump pump. It had worked fine until now.2yrsold. The float is sticking. I took it apart and cleaned the shaft, and both floats and put a thin coat of Vaseline and reassembled. HELP ...
Question about 1/2-HP Cast-Iron 83 GPM Submersible Sump Pump 56285-UTL1
impeller runs, no water comes out. Removed output hose, air is blowing out when removed from sump. Remove bottom cover, check for clogged intake holes, and make sure the impeller is solidly attached ...
Question about 1/3-HP Cast-Iron 95 GPM Sewage Sump Pump 58117-UTL1
...I replace with & how much? The oil has to be there. Intermittent starting is usually the float switch hitting something in the sump. If the pump motor has a capacitor on it, replace the
Question about 1/3-HP Cast-Iron 95 GPM Sewage Sump Pump 58117-UTL1
...Utilitech pump starts, pumps for 15 seconds and then kicks on and off. Just about field stripped the pump to find an overload device but can't find one. The pump runs smoothly when it runs. ...
Question about 1/3-HP Cast-Iron 95 GPM Sewage Sump Pump 58117-UTL1
Utilitech Pump UT58150? Where can I find e replacement switch for it please? Question edited for clarity and spelling of maker. Question moved from Cars and Trucks Category. Parts and switches https:/
Usually answered in minutes!
136 Questions
113 Questions
61 Questions