...Color Systems as described on this page. Also, the Discs should have the following logos and should meet these standards. ? CD-ROM ? Compact Disc-Interactive (CD-I) ? Compact Disc-Recordable (CD-R) ? ...
...sound When connecting VCR to TV. Verify all connections. First if the connection is with coaxial cable make sure you signal from outside is screwed to the cable input on VCR. Then the VCR/TV output ...
Question about Aquos LC-42D62U 42 in. LCD HDTV
...VCR recorder. Cable cords are going out to TV from this unit and in from cable box. I get no sound at all and picture only from DVD part. I need both to work. Thanks for any help. When you use ...
...picture isn't it? Typically the Yellow is video and Red and White are Sound. So only one is for video two are for sound normally. Basically they are about the same thing, the only difference there ...
Question about RDR-VX515 DVD Recorder/VCR
...sound and yellow for video. Set the VCR to line input and the TV to the input you have the VCR connected to. This connection setup gives a better picture and sound quality that the RF connection ...
...jack - white - and you'll need to get a Y-adapter at Radio Shack to join the right and left audio into one plug for the TV.) You'll get a better-quality picture and sound connecting the VCR this
Question about DVDR3435V/37 DVD Recorder/VCR
...VCR player. So, I purchased a Philips DVP315OV/37 at Sears and connected it to my Aiwa stereo and then to my TV. Hooray!!! I got TV sound through the stereo speakers thanks to the Philips. All was ...
sound but no picture on the screen.. What did i do wrong Hello sir, hi, please check the video cable. If you are using the three color audio/video cable, the yellow one goes to the yellow input of the
im trying hook up my dvd player i have the sound but the picture wont show and i put it on every channel Try using the Yellow, Red & White Jacks to the TV, wire color to color.
...VCR press play... do we have a picture and sound? okay press stop.. get a DVD disk place it into DVD player press play.. using your TV remote we need to change the source from component/cable to AV1 ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions