...USB cable. 6.) Re-cone ct Power cable. 7.) Press "On" Button. And all should be seet, not in my case the blasted red alarm is on and the error message returns again. Anybody knows how to fix this ...
Question about PIXMA MP780 All-In-One InkJet Printer
...slow scanning. The PC scan software will hang, the process doesn't go on. I'm trying to change the USB cable and reinstall the driver. Also the same case. What should I do ?? What is the problem ?? ...
Question about PIXMA MP530 All-In-One InkJet Printer
USB. The tank is not empty, I tried powering dn/up, took the tank out and put it back in , nothing has helped so far... Help ! Thanks \ Dan Install the Print Head and Ink Tanks MP530 / MP800 / MP800R
Slow printing This might be a ridiculously easy problem to solve but if more than one documents are printed one after the other I have to wait almost 10 minutes for the next document to print. The ...
Question about Pixma iP2600 Photo InkJet Printer
slow down to the speed of the 1.1 USB technology. Try running the setup and see what happens. I did this in the past and I believe I did get it to work. Yes, you can install it to the USB 1.1 computer
...slow (USB, WIFI or ethernet) - Your computer that doesn't send data fast (slow hard drive) - Your printer settings are for high quality printing (the higher the quality is, the slower the printer is) ...
...USB slow. Cannon Coolpix E9 is "the connected digital/ video camera does not support Camera Direct Print". Error 9 is caused by missing system files or broken system registry structures. This is a ...
my canon mx320 says error 5200 Hi Good day!!! Do this steps 1. Turn off printer 2. Open up the top cover and move the print head to the center 3. remove all cartridges and then turn back on wait a few
...usb but not wireless. I tried using an ethernet card to physically hook my computer to the router and thend download the drivers but that doesn't work either. Can someone tell me what I need to do to ...
Question about PIXMA MX310 All-In-One Printer
...slow to respond to command or not at all Tried uninstalling printer and re-installing but there was no effect. Also the Wi-Fi light stays on even though I'm using a USB connection I fixed my printer ...
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions