...remove them from the crankshaft. Unscrew the oil pump's mounting screws. Take the oil pump off its seat and remove from the crankshaft. Remove the bottom washer. 5 Disassemble the oil pump. Knock out ...
...Remove spark plug.Use a piston stop to stop the piston rising, Sometimes a knotted piece of pull cord fed into the cylinder is just as good.Turn the clutch clockwise with a socket to unscrew. To put ...
Question about 16" Chainsaw Bar Chain Saw 018 025 Ms 180 250
...unscrew the clutch itself. It is a reverse thread so turn it to the right to remove it. Once that is off you will see a large washer that can be lifted off. Under that you will see the oil pump drive ...
Question about 16" Chainsaw Bar Chain Saw 018 025 Ms 180 250
...Unscrew the air filter cover and remove it, if you can't see it on top of the engine then Insert the socket wrench onto the spark plug and remove it from the engine. Discard the old spark plug and ...
Question about 16" Chainsaw Bar Chain Saw 018 025 Ms 180 250
...Handle Housing: Locate the throttle trigger on the handle housing and remove it. This may involve unscrewing parts of the housing or loosening screws to access the cable. Replace the Throttle
Usually answered in minutes!
136 Questions
113 Questions
61 Questions
